Come in 5-meter reels, 12V DC input, 20 DMX512 IC, and 60 pcs  SMD5050  RGB LED per meter. Each 3-LED segment can be cut

We have 4 different 12 Volt Digital RGB LED Strip Light Kits that can control each 4″ section of 3 LEDs. Our basic kits have pre-programmed controllers that have built-in lighting scenes or you can purchase a DMX kit to control the LED strips by DMX control. Each 4″ section of 3 LEDs can be individually addressed for amazing lighting effects. We also have a Dream LED Strip with a built-in controller. Most of the strips are UL recognized, all are RoHs and CE approved.

Must be equipped with a controller and 12V power supply to work!

Voltage: DC12V,

Power: 14W/m,

Luminous angle: 120,

Number of light: 60LEDs/m,

Size: 60 segments per meter, board width 10MM, thickness 3MM

Number of pixel points: 20pixels /m

Display color: full color

Lamp bead type: 5050RGB

Control mode: 512

Data transmission rate: 800K/S

Display gray level: 256

Line board color: white/black

Operating temperature: -40℃~80℃

Service life: 30Kh 

 Product Description.

1, this product is a full-color DMX512 external control soft light bar, every three lamp beads for a pixel point.

2, any one of the points is bad and does not affect the signal transmission, the points below the bad point normal use.

3, directly controlled by the controller of the DMX512 signal, receiving the console does not require decoding diagrams.

4, control of a single light running, flowing, open windows, meteor chasing, chasing, animation, video, text and other fancy changes. Any color can be displayed, any combination can be displayed, the easiest combination into any pattern especially made into a light bar screen to use.

5, any two-pixel transmission distance of 5 meters (the specific transmission distance to the site signal line and environmental interference varies).

6, the signal is a serial single-wire cascade interface, through a signal line for transmission.

7, PWM console can be adjusted to 256 gray levels, a total of 16777216 total luminescent colors can be adjusted.

8, when the refresh rate of 30 frames/second, the high-speed mode cascade number does not exceed 512 points.

The DMX  led strip lights to have rich and vivid colors, high visibility, and are more visually attractive. It is widely used in wall corridors, indoor environment decoration, product model lighting decoration, game machine lighting decoration, speaker lighting decoration, entertainment venues, liquor cabinet bar backlight, ceiling backlight, LED light box light source, LED luminous sign, aquarium supplies, car decoration, etc. It is a new generation of lighting light that replaces traditional neon lights, fluorescent lamps, and tubes.

1、City outline lighting including building, advertising wall, signboard, Christmas landscape, and other decorations.

2, irregular design body decoration such as hotels, nightclubs, KTV, and other places of polygonal walls, water drops, and ceiling cove design.

3, home concealed groove edging such as door frames, bar, wine cooler, closet, TV cabinet, etc.

4、Car beauty such as car body, car bottom.

Installation methods.

1, indoor installation: Best led strip lights for indoor installation is relatively simple because it does not have to withstand the wind and rain. Installation can be directly torn off the 3M double-sided adhesive surface sticker on the back of the strip, and then the strip is fixed in the place where it needs to be installed according to the flat on it. If you meet the corner of the strip is too long and too short, the LED strip can be cut or welded at any point in each group with the scissors logo cut line alone.

2, outdoor installation: outdoor installation because it will be subject to wind and rain, can not be fixed with 3M adhesive, so outdoor installation often use the slot fixed way, the need to cut and connect the place, the same method, and indoor installation, but need to be equipped with additional waterproof adhesive, to consolidate the waterproof effect of the connection point

Input voltage: DC24V

LED Type: Grade A high quality 4 in 1 SMD 5050 LED

Available Color: RGBWW (2700-3200K Warm White), RGBW(5500-6500K White)

Power consumption: 19.2W/m max

IC Qty: 10 pcs DMX512 IC per meter

LED Qty: 60 pcs 5050 SMD LED per meter

PCB Size: L5000*W12(mm)

View angle: 120°

Channels / Pixels: 4 Channels per Pixel

Control Method: DMX512 Control

Protection rate: Non-waterproof or IP67 waterproof (sealed in silicone tube)

FPCB color: white

The DMX512 IC has the max485 inside, which follows the principle of the dmx512 protocol. The addressable RGBW led strip comes with fIve wires, +24V, PI address writing wire, A(DA+), B（DA-), GND, respectively, and can be controlled directly via DMX controller without using decoders. The red, green, blue, and white (3000K/6000K) diodes can be mixed to potentially produce over a billion color rendering options.

I. 24v RGBW led strip lights features.                                           

Ø can choose CREE, Epistar, Sanan chip high bright 5050RGB SMD LED, long life, low attenuation, good color consistency.

Ø soft light bar using pure silicone, anti-UV, anti-aging, yellowing resistance, very environmentally friendly non-toxic, very soft, can be bent up and down, safe and reliable, easy to install, 90% energy saving than traditional lights.

Ø Using SMD5050RGB lamp beads, using external driver chip DMX512, 1m 10 segments, to achieve addressable, programmable digital light bar, compatible and extended DMX512 (1990) signal protocol, the control mode is differential parallel, built-in 485 decoding module, strong anti-interference ability

Ø support the operation mode of writing code after installation can be programmed by the controller to achieve any animation effect of the product.

Ø The DMX brightest RGBW led strip uses DC constant voltage power supply DC24V, which meets the national safety standard, safe to use, not easy to break, no need to repair.

Ø RGBW led strip outdoor with 60 lights per meter, the length can be customized, 5 meters per strip.

Ø Luminous angle 120°.

Ø Products can pass CE certification, RoHS test.       

II. Product application

 This DMX digital RGBW led strip is suitable for advertising signs, hotels, bars, KTV, nightclubs, bridges, and other building exterior and interior lighting projects.

III. Light parameters.                                                

Note:

①The test environment temperature is 25±2℃

  ② Due to the specificity of the manufacturing process of LED products, the typical parameters of the technical parameters only reflect the statistical data and do not necessarily correspond to the actual parameters of each product, the actual data of the product may be different from the typical parameters.

IV. Electrical parameters and use of the environment.   

We can create a dramatic impact and captivate your audience in your exhibit or event space.

Our lighting Technicians work with you to create the lighting effects you are looking for to put your products/services in the spotlight.

Our inventory includes the latest in LED Technology including RGB/RGBW Color Changing, programmable lighting,

and the latest DMX lighting control software.

• UV Protective Coating – prevents damage to the SMD 5050 LED chips and ensures that the strip remains transparent and does not become opaque over time
• Internal wires in strip contain copper, which helps improve product performance and lifespan
• These SMD RGB LED Strip Lights are controllable using DMX technology

RGB 24V Strip Light Applications:

LED strips available in various colors and lengths for use in the vehicle interior or exterior.

Cut the strips to the required size and the flexible strips will mold to the surface,

so you use them in any situation your imagination can think of. Suitable for cars, motorbikes,

boats, indoors, and many, many more applications. Choose the color you prefer from red,

green, blue, fuchsia, white, and amber. The LED strips are water-resistant and their strong adhesive will keep them firmly in place.

Adhesive backing
Various lengths
various colors
Can be cut to the desired length

Cove Lighting | Recessed Lighting Effects | Landscape Lighting | Stairways | Building Outline | Architectural Lighting |

Back-Lit Signs | Home Accent Lighting | Entertainment Centers | Bars & Liquor Displays | Art Displays & Sculptures