Built-in IC series flexible pixel screen: simple, powerful, perfect flexible screen, can come out of the word, run animation, run effects, show anywhere, anytime

D256-16*16 flexible board pixel screen, specially designed for LED clothing and other areas of a special design of LED dot matrix display products, small size, light weight, arbitrary bending, easy to carry…

Low voltage drive, serial constant current

Product Features.

Built-in IC flexible pixel screen Adopt the world’s first built-in IC series of lamp beads drive luminescence as one of the high quality flexible pixel screen outside the calendered copper circuit board composition. Simple and beautiful, this lamp bead is also a very stable performance and very high brightness driving lamp beads. The lamp beads, high brightness, stable performance, simple board, beautiful, easy to produce, failure rate. It is the ideal design choice for lighting illumination outdoor lighting.

Product advantages.

One, powerful, through the programming controller, to display any text, pictures, animation, dance, dazzling, fireworks, and other effects you want.

Two, easy to carry, small, slim, plus the use of flexible design, does not take up space, can be used for education, product display.

Third, all circuits of the pixel screen are convergent, with no touch to avoid short circuits.

Product composition.

Using advanced built-in driver IC 5050RGB lamp beads + circuit board + protection resistor + filter capacitor

Size parameters.

1、Product model: 16*16 pixel screen

2、Light source: SMD 5050 RGB;

3, plate: soft copper board, calendered copper

4、Chip: Sanan;

5, driver IC model: SK6812 IC

6、Gray level: 256 levels

7、Lighting angle: 120 °;

8, light color: full color;

9, the standard operating voltage: DC 5V;

10、Power: 0.3W ±0.01% ;

11、Waterproof level: not waterproof.

12, FPCB board size: width: 17Cm, length: 17Cm; thickness: 3mm;

13, FPCB color shape: black, square

14, the number of light-emitting beads: 16 * 16 = 256

15, We can provide a matching illumination controller and power supply

You have your gaming computer set up. You installed a new RAM stick for more memory. You have a brand-new mouse and the perfect gaming keyboard hooked up.

Despite all of these upgrades, your gaming computer set-up looks dull. You need something to give it some fun and a funky vibe. You need some serious color.

That’s where RGB light strips for PCs come into play. You can install these cool strips in your keyboard, monitor, mouse, and PC case.

Whatever you want to light up with your computer setup, you can.

Not all RGB light strips are created equal. Quality is important if you want to keep those awesome colors flashing while you’re gaming.

Here we have a 300m long Addressable Individually addressable led strip. It comes with 12 RGB LEDs and has got a Built-in magnetic strip, and adhesive tape for super easy installation. This 5V RGB strip uses the 3-pin(+5V-D-G) connector and is compatible with any motherboard having it. The LED lights on the strips are very bright and the colors look nice too. The strip is flexible and can be bent easily to fit around corners and in tight spaces. You can also daisy chain multiple strips for enhanced lighting.

It also supports the addressable RGB LED control box, and you can change and customize the lighting effects using the Asus Aura Sync, Gigabyte RGB Fusion, MSI RGB Mystic Light Sync, ASRock Polychrome Sync RGB software. It comes in a pack of two and is pretty inexpensive too.

Number of Lights: 300 Lights

Length: 16.4 Feet

Mounting: Silicone Clips and Screws

Our Rating: 5 stars out of 5

The MSH waterproof RGB Individually addressable led strip delivers an amazing 24-bit color display.

With an LED light strip, you’re able to customize every pixel by both color temperature, hue, and animation. You can get creative with these lights, which is why they’re our favorite.

You can program the lights with Arduino, Fadecandy, FastLED Library, Raspberry Pi, and T1000S.

The installation of these lights is simple. The kit comes with both magnetic clips and screws. Either way, your lights will remain stable and safe, even if you install the lights outside.

MSH covers the LED lights in silicone sheathing for protection from damage. This LED lighting is also weather-proof and waterproof, so it’s protected from different weather conditions too.

They’re made to last for about 50,000 hours.

Included in the kit are three-pin JST-SM connectors and ground wires on opposite ends.

You can adjust the connectors as needed. They’re flexible so you can bend them slightly. You can also wind them or curve them around objects.

Plus, they won’t get ruined if you need to cut off a few LED lights. This is because each light is independent and has its own circuit cell.

The kit also includes five silicone clips and 10 mini screws for installation.

MSH provides bright addressable RGB light strips for your computer and computer accessories.

You can control these lights with a 5V three-pin ADD-RGB header on the motherboard. You don’t need any other controller for this.

It lets you synchronize the lights with any ADD-RGB device, as well as Deepcool or Gamer Storm devices.

It takes next to nothing to install these lights. They have built-in magnets, so all you have to do is stick the strips to metal.

If you don’t have metal to stick them to, the lights also have a double-sided adhesive for other surfaces.

1m, 2m, 5m PC strip custom length is available.

Final Thoughts 

RGB Individually addressable led strips are a fantastic way to spruce up your gaming set or office. They’re an even better option if you’re a streamer. They give a pop of color and flash of fun to your streams.

As with every product, you don’t want to buy any RGB lighting strip kit you come across. So, we made this list of the top five RGB lights for you to help decide what works best for your gaming PC. You can always get multiple strips to create some fun accent lighting in your gaming room.

• The uniqueness of these strips is that you can control each LED, thanks to the chips located in each LED.
• You can control the brightness, color, and speed of any LED, which makes it possible to create an unlimited number of different effects.
• The strip is suitable for highlighting the interior of shops, restaurants, clubs, any entertaining establishments, in exterior design (building outlines, fountains, and pools), as well as in advertising lighting (illumination of letters, shields, etc.).
• Also on the pixel strip, you can get much more colorful effects, because of the running fire, the running rainbow, or the starry sky, which you can control yourself.

• 

Features and specifications

• Individually addressable RGB LEDs (30, 60, or 144 LEDs per meter)
• 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel
• The one-wire digital control interface
• 5 V operating voltage
• Each RGB LED draws approximately 50 mA at 5 V with red, green, and blue at full brightness
• 12 mm width, 4.6 mm thickness
• Flexible, waterproof silicone rubber sheath (IP65 protection rating)
• Includes flexible silicone mounting brackets
• Black strip color
• Power/data connectors on both strips end for easy chaining, and the input side includes an additional power and ground wire for alternate power connections
• Strips can be cut apart along the lines between each RGB LED segment to separate them into usable shorter sections
• Example code available for Arduino, AVR, and embed

Using the LED strip

Each LED strip has three connection points: the input connector, the auxiliary power wires, and the output connector. These can be seen in the adjacent picture, from left to right: auxiliary power wires, input connector, output connector. The strip uses 3-pin JST SM connectors.

The input connector has three male pins inside of a plastic connector shroud, each separated by about 0.1″. The black wire is ground, the green wire is the signal input, and the red wire is the power line.

The auxiliary power wires are connected to the input side of the LED strip and consist of stripped black and red wires. The black wire is ground, and the red wire is the power line. This provides an alternate (and possibly more convenient) connection point for LED strip power.

The output connector is on the other end of the strip and is designed to mate with the input connector of another LED strip to allow LED strips to be chained. The black wire is ground, the green wire is the signal output, and the red wire is the power line.

All three black ground wires are electrically connected, and all three red power wires are electrically connected.

Current draw and voltage drop

Each RGB LED draws approximately 50 mA when it is set to full brightness and powered at 5 V. This means that for every 30 LEDs you turn on, your LED strip could be drawing as much as 1.5 A. Be sure to select a power source that can handle your strip’s current requirements.

There is some resistance in the power connections between the LEDs, which means that the power voltage near the end of the strip will be less than the voltage at the start of the LED strip. As the voltage drops, RGB LEDs tend to look redder and draw less current. This voltage drop is proportional to the current through the strip, so it increases when the LEDs are set to a higher brightness.

We tested the current draw and voltage drop of some LED strips by setting all the LEDs to full brightness, and these were the results:

• The 30 LED 1 m strip drew 1.5 A and had a voltage drop of 0.2 V.
• The 60 LED 2 m strip drew 2.9 A and had a voltage drop of 0.8 V.
• The 150 LED 5 m strip drew 4.1 A and had a voltage drop of 2.0 V.
• The 60 LED 1 m strip drew 3.0 A and had a voltage drop of 0.6 V.
• The 120 LED 2 m strip drew 4.7 A and had a voltage drop of 1.4 V.

The voltage drop was computed by measuring the voltage difference between ground and power on the input end of the strip, then doing the same measurement on the output end, and subtracting the two values.

30, 60, 144: 30leds/m,60leds/m,144leds/m

(RGBCW 6000-6500K ;RGBWW 2700-3000K ;  RGBNW 4000-4500K)

the length as you choose

LED source :5050SMD RGBW built-in SK6812 chipset

Voltage(DC):5V

Power: 144LEDs/meter ——-43.2W / Meter

60LEDs/meter ———18W / Meter

30LEDs/meter ———9W / Meter

LED type :SMD5050

IC type :   SK6812

LED/per meter:30, 60,144leds/Meter (each LED is separately controlled)
IC/per meter: 30, 60,144IC/Meter (1 IC drives 1 led chip)

Pixel /per meter :30, 60,144Pixels/Meter
Grey Grade: 256

Color:  RGBW (WW 2700-3000K ; CW 6000-6500K;NW 4000-4500K)

PCB color:White / Black available
Waterproof Grade:

IP30: Non- waterproof

IP65: Waterproof in Silicon Coating

IP67: Waterproof in SiliconTube

IP30, IP65, There is a 3 M self-adhesive tape at the backside. You can install easily

Application:

Applicable for automobile and bicycle decoration, border or contour lighting

Widely used for home decoration use, hotels, clubs, shopping malls

Architectural decorative lighting, boutique atmosphere lighting

Extensively applied in Backlighting, concealed lighting, channel letter lighting

Emergency & security lighting, advertisement sign lighting

Decorative lights for holiday, event, show exhibition

WS2812B LED Strip Must Use DC5V Power Supply AND Led Controller to Control!

• Brand: MSH-LIGHTING
• IC type: WS2812B IC
• Color order: RGB
• Gray level: 256
• View angle: 120°
• Input voltage: DC5V
• Color: full-color 24-bit
• FPCB board color: Black/White
• FPCB Width:12mm
• Power:0.1W~0.3W/LED 14.4W~43.2W/3.3ft
• Recommended power supply：DC5V10A (50W)
• Standard Reel Length:3.3FT/roll
• Model: WS2812 strip 5050rgb chips
• Operating Temperature: -20 ~ +40°C
• Led Qty: 144LEDs/3.3ft 144 pixels/3.3ft
• Length x Widthx Height：1000mmx12mmx2mm
• Wavelength(nm): Red（620-630）; Green（515-530）; Blue（465-475）
• Waterproof level: IP30/IP65/IP67
• Double Side Tape: IP30/IP65. There is no double side tape on IP67.
• Light up 1 color（red or green or blue) 0.1W/LED . Light up 2 colors (red+green) 0.2W/LED , Light up 3 colors (red+green+blue=mixed white) 0.3W/LED

These super thin led strips are made by WS2812B LEDs wired in series. These LEDs have an IC built right into the LED. This allows communication via a one-wire interface. This means that you can control lots of LEDs using just one digital pin of your Arduino.

In the following figure, you can see the chip inside the LED. The LED is an RGB LED and works like so.