CON-spi &dmx-8ch cotnroller -MSHLED

• 8-Channel Output:
  • Controls up to 8 independent channels at once.
  • Each channel supports:
    • 1024 pixels for SPI/TTL signals.
    • 200 DMX ICs for DMX512 signals.
  • Output ports include:
    • GND DAT VCC for SPI/TTL LED strips.
    • GND A B for DMX LED strips.
• Signal Compatibility:
  • Supports SPI and TTL signals for addressable LED strips.
  • Supports DMX512 (UCS512) signals for professional lighting applications.
• Wireless Control:
  • Bluetooth 4.0: Allows remote control via the “LED DMX” app on Android 4.4+ or iOS 11.0+ devices.
  • RF Remote Control: Offers functions like on/off, brightness, speed, mode, effect loop, static color, and music synchronization.
• App-Based Programming:
  • Customize light color, mode, and timing.
  • Set RGB order, pixel count, and zone-specific effects.
  • Enable music synchronization with voice-activated mode or phone music.
• On-Device Controls:
  • Three simple buttons for adjusting the light switch, speed, and mode directly on the controller.
• Music Rhythm Synchronization:
  • LED lights can change in sync with music, creating dynamic and immersive lighting effects.
• Documentation:
  • A PDF manual (CON-SPI/DMX-8CH) is available for detailed setup and usage instructions.

Technical Specifications

How to Use the Controller

A) Pairing with LED Lights via Bluetooth

1. Download the App:
   • Search for “LED DMX” in the App Store (iOS), Google Play (Android), or other major app stores, and install it.
2. Power On the LED Lights:
   • Connect your digital LED lights to the controller and power it on using a DC 5-24V power supply.
3. Enable Bluetooth:
   • Turn on Bluetooth on your phone.
4. Connect via the App:
   • Open the “LED DMX” app, scroll down, and refresh to search for nearby devices.
   • Select your controller from the list to access the light control interface.
5. Customize Settings:
   • Adjust RGB order, pixel count, timing, and color values.
   • Create custom lighting effects for specific zones of the strip.
   • Enable music synchronization (voice-activated or phone music).

B) Wi-Fi Password Setup (Optional)

• If your setup requires Wi-Fi control:
  1. Power on the controller.
  2. Enable both Bluetooth and Wi-Fi on your phone.
  3. Open the “LED DMX” app and select the Wi-Fi device option.
  4. Press and hold the “S” and “M” buttons on the controller together.
  5. Enter a password in the app:
     • Default factory password: A1234567.
     • For resets, use a combination of English letters and numbers.
  6. Confirmation: The lights will flash white three times, indicating a successful password setup.

Why Choose This Controller?

The Bluetooth 8-Channel LED Controller stands out for several reasons:

• Versatility: Supports both SPI/TTL and DMX512 signals, making it compatible with a wide range of LED lighting systems.
• Synchronization: Controls up to 8 channels simultaneously, ensuring consistent color effects across multiple strips or displays.
• Ease of Use: Offers multiple control options—Bluetooth app, RF remote, and on-device buttons—for maximum flexibility.
• Creative Control: Allows for detailed customization, including music-reactive lighting and zone-specific effects, perfect for dynamic displays or events.

This controller is an excellent choice for anyone looking to manage complex LED lighting projects with precision and ease.

Additional Notes

• IP Rating: The controller has an IP20 rating, meaning it is not waterproof and should be used in dry environments.
• Working Temperature: Operates effectively between -10℃ and 60℃, ensuring reliability in various conditions.
• Power Supply: Requires a DC 5-24V input, so ensure your power source matches the voltage of your LED strips.

GC-6612ProhasanEthernetinterface,supportsART-NET, and GC-NET

standards, Users can connect to the controller via Ethernet and preview online. In

ART-NET mode supports 96DMX512 universes.

Datasheet of Artnet Controller GC-6612

Artnet controller 6612 Pro 2023_EN

Output

Input

Control multiple 0-10V power drives at the same time

• Operating temperature：-20-60℃ ●Power supply voltage：12V-24V optional

• Gross weight：133g ●Net weight：90g

• Output：3 circuits ●Product package size： L95*W55*H40mm

• Product size: L65*W60*H20 mm              

• Static power consumption：<1W ●Maximum load current：2A per circuit

• Standard box 100PCS/box

• Output power：12V<72W、24V<144W

Our led dimmer is mainly used to adjust the light brightness of monochrome led strips according to your actual requirements. With it, it can not only provide you with soft and stable light use but also avoid inrush current and protect your led lights from damage. In addition, it also comes with a knob controller, easy to install, easy to operate, and convenient for you to use at home. Specifications: Color: 100% brand new Brand Color: as shown Material: metal Brightness adjustable range: 0-100% Input voltage: DC 12V-24V 30A Input current: 0-30A, less than 30A Power: 12V 360W, 24V 720W Static power consumption: 1W Operating temperature: -20-60 degrees Celsius LED dimmer Size (L x W x H): approx. 85 x 66 x 20 mm/approx. 3.3 x 2.6 x 0.8 inches Package weight: approx. 130g Package contains: 1 x LED switch dimmer and 1 x User Manual Note: It is recommended not to use this switch to adjust multi-color mixed LED lights, such as RGB lights or strip lights, table lamps, fans, CFLs/bulbs, etc.

1、 Stable performance, good operability, simple and convenient wiring.

2, support customization of basically all single-line or dual-line LED driver ICs on the market.

3, comes with 76 kinds of pattern effects, dazzling and agile.

4、 Up to 2048 pixel points.

5、 Power supply with anti-reverse connection function.

The second, the key function.

MODE+

Forward to select the pattern effect

SPEED

Cycle to select the speed

MODE-

Backward selection of pattern effects

MODE+ and MODE-

Press MODE+ and MODE- at the same time and then release to enter automatic mode

III. Parameters.

Operating voltage: 5V or 12V DC voltage input.

Power consumption: less than 1W.

Currently supported ICs: WS2801, WS2811, LPD6803, LPD8806, TM1809, UCS1903, UCS9812, APA102, APA104; support customization of other ICs.

Note: Please confirm the power supply voltage before power-up.

IV. Application wiring diagram.

WS2811 mini controller

1. Wiring

The controller has three leads, of which red represents the positive power line (VCC), white (two: respectively, signal ground and power ground) represents the ground line (GND), green represents the pin signal line (DIN).

Microcontroller and light string connection: 3 leads are connected correspondingly, generally the red, white and green of the microcontroller and the positive, signal and negative of the light string correspond to each other.

Then the red wire is connected to the positive terminal of the external DC power supply, and the black wire is connected to the negative terminal of the external DC power supply, that is, the external DC power supply both to the microcontroller and to the light string.

2. Operation instructions

Before powering on, observe whether the power supply is the same as the working voltage of the controller (the controller has two kinds of 5V and 12V), and make sure there is no short circuit between the connection lines.

The mini controller has 3 buttons.

This controller does not regulate the output voltage to your LEDs. This simply means that the voltage of your

power supply for the controller (5-24V) MUST match the voltage requirement of your LEDs. For example if your

LEDs require 5V the power supply that is powering the controller MUST also be 5V.

Features:

• iOS & Android App Control via Wifi

• 180 Dynamic Multi-Color Modes

• 8 Single Color Modes

• From Image to Effect for DIY Patterns

• Color & Brightness Adjustable

• Pattern Speed Adjustable

• Supports 29 LED Driver ICs

Specifications:

– Model: FamousLED SP108E WiFi Color Controller

– Working Voltage: DC 5-24V

– Remote distance: 100 ft

– Pixel Control: Up to 2048 LEDs

– Working Temperature: -20℃~60℃

– Product size: 85mm*45mm*22mm

– Certifications: CE, RoHS

Precautions:

1. As previously advised, please make sure that your power supply matches the voltage required by LEDs (5-24V).

2. Although there is no option for WS1812B and WS2813 on the settings page, WS2811 works for both ICs.

3. This controller only supports LEDs with smart ICs, it cannot drive regular RGB/RGBW LED strips with no ICs.

4. Smartphone MUST be IOS 10.0 or Android 4.4 or later versions.

5. Please read the user manual included with the controller to learn how to connect and control.

Package Includes:

– SP108E WiFi Controller

– Mini screw driver

– 3pin-JST connector

– User manual

• WIFI Control. Sync multiple SP108Es together even if the led strips are in Different areas. It only works with a 2.4G WIFI network. DON’T use a 5G WIFI network. IOS 10/Android 4.4 or later version. If your LED light is 5V, please use a 5V power supply.
• Wide Compatibility. Support almost LED IC, such as WS2811,WS2812B, WS2801, SK6812, SK6812-RGBW, WS2813,SK9822,APA102,WS2818, LPD6803, LPD8806, TM1913, UCS1903, SM16703, DMX512,etc. (DO NOT control 5050RGB or RGBW led strip which has no IC )
• Rich Color Modes. 180 kinds of multi-color dynamic modes, and 8 kinds of single-color modes such as a meteor, breathing, wave, catch-up, stack, flash, flow, and static. Color, brightness, and speed are adjustable.
• Capture the image’s color you like. The WiFi controller features a creative from-image-to-effect function. It can capture the color of an image, create a distinctive color effect, and synchronize light color with the atmosphere of your room.
• User-friendly design. MAX 2048 pixels (Recommend 1500 pixels)in total. Save user settings when power is off. DC 5V/DC12V/24V wide working voltage; reverse connection protection; hot-swap protection

SP108E wifi led controller operating instructions

WIFI Group control:  Sync multiple SP108Es together even if the led strips are in Different areas. It only works with a 2.4G WIFI network. DON’T use a 5G WIFI network. IOS 10/Android 4.4 or later version.

Wide Compatibility:  Support almost LED IC, such as WS2811,WS2812B, WS2801, SK6812, SK6812-RGBW, WS2813,SK9822,APA102,WS2818, LPD6803, LPD8806, TM1913, UCS1903, SM16703, DMX512,etc. (DO NOT control 5050RGB or RGBW led strip which has no IC )

Rich Color Modes:  180 kinds of multi-color dynamic modes, and 8 kinds of single color modes such as a meteor, breathing, wave, catch-up, stack, flash, flow, and static. Color, brightness, and speed are adjustable.

Capture the image’s color you like:  The WiFi controller features a creative from-image-to-effect function. It can capture the color of the image, create a distinctive color effect, and synchronize light color with the atmosphere of your room.

User-friendly design:  MAX 2048 pixels (Recommend 1500 pixels)in total. Save user settings when power is off. DC 5V/DC12V/24V wide working voltage; reverse connection protection; hot-swap protection

APP control

1. Bothe the IOS version and Android OS version are available. (hardware should support WIFI) 

2. Requires IOS version 10.0 or later

3. Requires Android OS version 4.4 or later.

4. Search “LEDShop” in the APP store or Google Play or scan this QR code to download and install the APP,

Functions:

Botton:

1, Click on the button: Switch AP/STA mode;

2, Long press the button: Enter the SmartCongig mode;

LEDIndicator:

1. Blue: AP(Access Point) mode;
2. Green: STA(Station) mode;

Working Mode

A.AP(Access Point) mode: Controller and Phone connect directly, the controller works as an access point.

1. Go to your phone Settings, find and connect the controller(named like SP108E_XXX, the default password is (12345678);
2. Open the LED Shop App, then the controller name will be shown on the device list;

B.STA(Station) mode: Controller and phone are in the same WiFi network, in this network, users can operate the controller smoothly.

There are two ways to configure the controller into the local WiFi network:

• SmartConfig Automatic Mode (This mode requires your phone has connected to a 2.4GHz WiFi)

1. Make sure your phone is connected to a WiFi network, by pressing the Add Device button;
2. Input your WiFi password, press the next step, and select Automatic mode, long-press the button of the controller until the LED indicator flashes green; 3. Pressing the OK to confirm and wait for the configured processing to finish;
3. After the configuration is finished, the LED indicator will turn solid green, drag to refresh the device list, and the controller will be shown on the device list.

• Manual Configure Mode (This mode requires your phone has connected to a 2.4GHz WiFi or has connected to a 2.4GHz&5GHz combined WiFi network)

1. Make sure your phone is connected to a WiFi network, by pressing the Add Device button;
2. Input your WiFi password, press the next step, and select Manual mode, click the button of the controller to switch the controller to AP mode(the LED indicator will turn solid blue);
3. Go to your phone Settings, find and connect the controller(named like SP108E_XXX, the default password is 12345678);
4. Go back to the APP and press the next step to start the configured processing; 5. After the configuration is finished, the LED indicator will turn solid green, drag to refresh the device list, the controller will be shown on the device list.

Removing device: The user can select the controller and remove it from the network by pressing the Remove Device button on the APP, or just clicking the button of the controller to switch the controller into AP mode.

Supported chip

WS2811、WS2812、WS2813、WS2815 WS2801、SK6812-RGB、SK6812-RGBW、SK6812-WWA、LPD6803、LPD8806、UCS1903、UCS9812、APA102、APA104、TM1803、TM1804、TM1809、TM1812、TM1914、SM16703, DMX512

Support  IC  (Support WS2813 WS2815 WS2818 chips)

How to set up the controller?

The first method is to connect the controller.

Search “LED Shop” in the app store or scan the QR code on the box. Install the app on your smartphone or Tablet.

The first method is to connect the controller. The controller works as an access point. Open the wifi setting page of your cell phone, find and connect the controller (named SP108E_xxx, the default pin code is 12345678).

The second method is to connect the controller.

Turn off the power of the controller. Wait for 1 minute.

Connect your phone to your wifi network, and open LED Shop APP.

When the controller is not connected to any WIFI network, power on the controller, and the controller will remain in Wait-For-Connect mode for 20 seconds;

Within 20 seconds, press the Add Device button, input the WIFI pin code, and press the OK to confirm. Then wait for the configured processing to finish;

When the controller successfully enters the WIFI network, it will be shown on the device list. ( Choose one of the two connection methods)

Set the R/G/B sequence, and make it synchronize with your lamp.

Choose the IC type, making it the same as your lamp

Set the pixel number of each section.

Set a number of sections. The total pixels should be no more than 2048.

Two Connect Modes

• AP (Access Point) mode:

The controller and Phone connect directly, and the controller works as an access point.

• STA (Station) mode:

The controller and phone are in the same WIFI network, in this network, users can operate the controller smoothly.

Please note:

Sometimes, this controller is pretty hard to use in the STA mode. Use another two or three smartphones, all of them install the app and all the phones try the STA mode at the same time. Try more times. It will succeed. The first time is pretty hard, but later will be easier.

The difference is that the LC1000A does not support cascading and has a maximum of 1024 control points. Click to view the LC2000B link.

Features

1,Input Voltage: DC12-24V
*This controller can control 5-24V slideshow strips, but the controller power supply must be 12V or 24V; if the strip is 5V, then the strip and controller must be powered separately.
2,1024 dots max.
3,4 Text Playback Mode, 6 Music Mode, 243 Horse Racing Mode
4, RGB light sequence adjustable
5, 32-speed regulation
6, Power-down memory function
7, not cascadable
8, Music Control Function
9, Text Playback Function
10, WIFI connectivity, app control (currently Android only)

Support RGB common IC in the market.

6 features: customized to meet user requirements

Music Spectrum

Real-time Writing

Arbitrary Color Tuning

Wifi Control

Custom Lists

Various Effects

1)Multiple Music Modes Music Spectrum, Music Control Speed and Brightness

—Music Spectrum – Light Changes with Music

2)App side input text, characters, patterns can be displayed in real-time

—–Real-time Writing – Customize Display Content

3)250+ built-in motion effects

Custom List Play

Pick your favorite effect and play it on a loop.

Note: Customized support can be added based on user-supplied samples and chip manuals.

Wireless Wifi, Free Link.

A powerful amount controller

Light changes with the rhythm to enhance the atmosphere of the scene, built-in more than 250 effects customization list loop playback

Specific Parameter:

Product Datalist when shipping

Lighting No more rigid
Music Spectrum + Real-time Writing
Built-in music real-time spectrum effect and real-time writing effect, so that the lighting is no longer rigid,

and the lighting effect is completely integrated into the environment and music. The built-in real-time writing

the function can be modified at any time with the cell phone terminal, and the first time through the lighting text show!
Translated with www.DeepL.com/Translator (free version)

6 features: customized to meet user requirements

Music Spectrum

Real-time Writing

Arbitrary Color Tuning

Wifi Control

Custom Lists

Various Effects

1)Multiple Music Modes Music Spectrum, Music Control Speed and Brightness

—Music Spectrum – Light Changes with Music

2)App side input text, characters, patterns can be displayed in real-time

—–Real-time Writing – Customize Display Content

3)250+ built-in motion effects

Custom List Play

Pick your favorite effect and play it on a loop.

Wireless Wifi, Free Link.

Free connection terminal, 2 sets of interfaces for any use
Output 4 or 2 signals without cascading.

Lc2000b Controller Wifi

1, input voltage: DC12V-24V (* case marked DC5V-24V is inaccurate, the controller can control 5-24V slideshow,

but the controller power supply must be 12V or 24V, if the 5V strip, then the strip and the controller must be powered separately)
2. 2048 points max*2CH
3.4 Text Playback Mode, 6 Music Mode, 243 Horse Racing Mode
4, RGB light sequence adjustable
5, 32-speed regulation
6, Power-down memory function
7, cascadable, the first controller defaults to the host after cascading.
8, Music Control Function
9, Text Playback Function
10, WIFI connectivity, app control (currently Android only)

SPI and DMX LED Controller

1、32 to 65536 degree Gray control, Gamma correction procession handle.
2、Support various points, line light source, and all kinds of rules and specifically shaped handle.
3. The controller has one output port, can support up to 512/2048 pixels(DMX lighting support up to 512 pixels).
4、Play content stored in the SD card, the SD card can store up to 32 effects File, SD card capacity support 128MB-32GB.
5、The controller can single set use, also multiple controllers cascades, cascade optical isolation mode: interference, better stability,

cascade distance between two controllers can reach up to 150 meters, need to use a 0.5M² pure copper power cord.
6、The controller support chip can lock the support IC in software, or not lock the support IC in the software, select the support

IC through the controller CHIP button, this scheme is more flexible and convenient.

7、For the DMX lighting IC, the controller comes with write address function; In addition, with the use of our 2016 LedEdit-K V3.26

or later edition can make one key write address function setting.
8、Support load lamp is 4 channels (RGBW) pixels or splits into single-channel point pixels.
9、Enhanced 485 TTL and 485 differential (DMX) signal output.
10、The controller comes with the test effects were as follows: 1 red, green, blue, and black jump; 2 red, green, blue, and black gradient; 3 red, green, blue and goes.

NOTES:

1.If support RGBW four channels’lights should select  K-1000-RGBW.
2. If support single-channel t light should choose  K-1000-W, at this time, one channel means one pixel,the software effect makes as white lighting.

Button  meaning:

Specific  parameter:

Brief introduction

Performance Features

Digital Dmx led light Artnet Controller converter compatibles with Madrix, MadMapper, Arkaos, Sunlite, Avolite, Martin, and other software.

Different output ports led Artnet device is available.

1, 4x512ch led digital Artnet converter is mini size, suitable for a small project.

2, 8X512ch, 16x512ch, 12X512ch, 20x512ch, 30x512ch dmx Madrix led artnet controller are good for middle & large project.

3, 8X512ch, 16x512ch Dmx led Artnet converter has an LCD display to show IP information.

4, Digital Artnet converter device supports DMX512, DVI, SPI led lighting.

5, Programmable matrix led Artnet controller compatibles with Madrix, Sunlite, and other software can be music activated.

6, DMX led Artnet converter can transfer the signal to a long distance with good quality.

7, Digital Artnet converter is suitable for entertainment lighting and Architectural Lighting.

8, 1U rack housing matrix led Artnet converter is available.